TOSR08-D - 8 Channel USB/Wireless Timer Relay Module Xbee Control Kit

This is an Xbee Relay remote control kit. The kit package includes:

• 1 x TOSR08-D 8 Channel USB/Wireless Relay Module
• 2 x XBee S1 Wireless modules
• 1 x XBee USB adapter
• 1 x Mini USB 

Description: This USB/Wireless relay module allows computer controlled switching of external devices by using the USB port of your computer.

It  has a wireless extension port, that can work with XBEE or Bluetooth Bee or Wifly modules, which means now you can control your device by Zigbee or Bluetooth or WiFi.

The TOSR04-D module can be powered by USB bus or DC power and provides two-volt free contact relay outputs with a current rating of up to 10 Amp each.

It also supports the delay timer function. You can set each relay output delay from 0 second - 24 hours.

Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.

A full datasheet for the relays used on the TOSR0x is here: G5LA datasheet

If you use DC Power, the Input voltage should be DC 5V.

First Step - Install the Driver
The TOSR08-D module uses FT232RL USB to UART chip. Before using the TOSR08-D you will need to download the FT232RL Driver.

Connect the TOSR08-D and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.

The TOSR08-D will now appear as a com port.

Commands
The TOSR08-D operates with an easy to use command set as described in the table below.

TOSR08-D Baud rate: 9600 

Test program
To get the TOSR08-D up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.

Documents:

• User Manual
• G5LA datasheet
• FT232RL Driver
• Test Program
• Realterm serial debug tool
• Controlling a TOSR0x USB Relay Module Using Python  (Thanks James!)
• Linux Python module
• iPhone APP (WIFI)   Timing function is not supported
• Android APP(WIFI)
• Android APP(Bluetooth)