location_on
2 x 8 Watt Bluetooth Audio Amplifier Kit - TSA2210
Product Code: G58E765156DD54
Product Description
TSA2210 is a 2x8W class D audio amplifier board with Bluetooth 4.0 integrated function.

This kit is designed for factory or DIY users. A volume controller knob, weatherproof panel mount LED and a TSA2210 amplifier board are included in this kit.

Users can adjust the Audio volume either using the smart phone (via Bluetooth) or turning the real physical knob.

You can power this kit with a 12V DC power supply or a 12V batttery. The LED can indicate the ON/OFF state and the battery voltage state. Users can install this kit in a box and make their own audio amplifier product.

It has perfect class-D architecture (based on TPA3110D2) and every channel has 8W power output. This board can be powered by any DC 8V-16V power supply. It can be used to drive any 4Ω or 8Ω passive speakers.

The Bluetooth audio volume control circuit is also integrated on this board. Turning the knob clockwise will increase volume and turning the knob counter-clockwise will decrease the volume. Clicking the knob will turn ON/OFF the amplifier.

It's perfect for your Hi-Fi application, the audio source can be RCA or Bluetooth. You can pair it with a mobile phone and play audio. 

Power up the amplifier board, use your phone or PC (etc) to search for a new Bluetooth device. The module will appear as "BT Speaker" on your phone.

You don't need a PIN code, simply pair it up and you can play your music.


 
 

Note:  When the power voltage <10.3V, the amplifier board will auto turn off and goes into standby mode. If you click the knob to turn it on again, the LED will blink 3 seconds and turn off again.
 
Specification:

TA = 20℃, fIN = 1 kHz sine wave, RL = 4Ω. (Unless otherwise stated)

Parameter

Condition

Min

Typ

Max

Supply Voltage (V)

-

8

12

16

Quiescent Current (mA)

SD = 2V, No load, Vcc = 12V

-

20

35

Input Sensitivity (V)

Gain = 26dB

-

0.283

-

Input Impedance (Kohm)

-

-

30

-

Gain (dB)

-

 

26

 

Output Power (W rms)

THD+N = 10%, Vcc = 12V

-

8

-

Efficiency (%)

Vcc = 12V, RL = 8Ω, PO = 5W

-

86

-

Minimum Load (ohm)

-

3.2 

4

-

Frequency Response (Hz)

±3dB

20

-

22k

Operating Temperature (℃)

-

-40

20

65

 
Kit contains:
  • 1 x TSA2210 Bluetooth Audio Amplifier Board
  • 1 x Volume knob
  • 1 x Weatherproof panel mount LED (Green)
  • 1 x Ribbon cable
Features:

  • Size: 4.8cm x 8cm
  • Bluetooth audio volume control
  • Working voltage: DC 8V-16V
  • Standby current: 0.12mA@12VDC
  • Over/under voltage protection
  • Over current protection
  • Over temperature protection
  • Bluetooth 4.0
Applications:
  • Personal computer
  • Desktop amplifier
  • Microphone preamplifier
  • Home DIY
  • Vending machine,Lifts
  • Interactive kiosks
 
$27.50 inc. tax
Units in Stock: 100
Add to Cart Quantity:
Product Details
Product Condition: New
Product Description
Reviews
No Reviews Posted Yet - be the first! write review
Product Added to your Cart
x

-------- OR --------