You can now check out in 10 different currencies.

ALL CATEGORIES

*SIM800F GSM/GPRS Arduino shield is 100% compatible with SIM900 GSM/GPRS Arduino shield.

The GPRS/GSM shield provides you a way to use the GSM cell phone network to receive data from a remote location. The shield allows you to achieve this via any of the three methods:

  • Short Message Service
  • Audio
  • GPRS Service

The GPRS shield is compatible with all the boards which have the same form factor (and pinout) as the standard Arduino Board.

The GPRS shield is configured and controlled via its UART using simple AT commands.

Based on the SIM800F module from SIMCOM, the GPRS Shield is like a cell phone. Besides the communication features, the GPRS Shield has 12 GPIOs, 2 PWMs and an ADC.

Note:

  • Because SIM800F has peak current more than 2A, this shield must work with a external DC 9V power supply.
  • If you are using MEGA2560, you just need to connect the middle pins of RX and TX jumpers to RX1 TX1 on Arduino Mega 2560 and change the code setting.

Features

  • Based on SIMCom's SIM800F Module
  • Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
  • Control via AT commands - 3GPP TS 27.007, 27.005 and SIMCom enhanced AT Commands
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
  • Embedded TCP/UDP stack - allows you to upload data to a web server.
  • Speaker and Headphone jacks - so that you can send DTMF signals or play recording like an answering machine.
  • SIM Card holder and GSM Antenna - present onboard.
  • 12 GPIOs, 2 PWMs and an ADC (all 2.8 volt logic) - to augment your Arduino.
  • Low power consumption - 1.5mA(sleep mode)
  • Industrial Temperature Range - -40°C to +85 °C 

Shipping contents:

  • SIM800F Arduino GSM/GPRS Shield x 1
  • Quad-band Cellular Duck Antenna x 1

Document:

 How long does it take to reach the USA, UK, Germany, Australia Canada and other EU countries?  

From China: If we ship from China, the delivery time can be from 7 working days to 15 working days. See the proof on the images below. US based orders are delivered more quickly than other countries.

Most of the USA, UK, Canada, Australia, and Germany  based orders are delivered within 7 days. However, because of customs related processes, it can sometimes take up to 15 days.  Check out all the shipment proof images on this page. 

From Australia: If you have chosen standard post, you will receive your parcel in 3-5 days (in Australia) and 5-7 days (outside Australia)

If you have chosen economy post, you will receive your parcel in 3-5 days (in Australia) and 15-25 days (outside Australia)

What is the proof that we really ship and they are delivered ?

 Check out all the shipment proof images on this page. 

Where do we ship from ? 

We ship our products from Australia and China depending upon what you purchase. BuildCircuit's original products are shipped from Australia. 

Check out our featured and best-selling products



You may also like

translation missing: en.general.search.loading