Big LazyBone Wi-Fi Dimmer - (Andorid/iOS)


Tinysine

G55F28D4166A95

100 In Stock

Regular price US$53.50
The Big LazyBone Bluetooth dimmer is a smartphone dimmer that has integrated Bluetooth 4.0 and a microcontroller. It supports both...

The Big LazyBone Bluetooth dimmer is a smartphone dimmer that has integrated Bluetooth 4.0 and a microcontroller.

It supports both Android and iOS. So, you can use your iPhone or Android phone to control this Big LazyBone dimmer.

Connect your lamp to it, you can dim the light using your Android/iOS smartphone or a computer.

It is compatible with AC 100-240V 50/60Hz which makes it usable worldwide.

After you connect this Lazybone device to your smartphone, you will see a virtual knob on the app user interface. Rotating the virtual knob will change the voltage at the dimmer ports. Dimming of light will also appear as the voltage level changes.

Compared to the previous LazyBone dimmer, the Big LazyBone offers a number of improvements. It can be set as a leading or trailing edge dimmer. It can work with an incandescent bulb, LED bulb (must be a dimmable one) or AC motor. It also has a real knob that can dim the light/motor speed manually.  


 

Note: For LED Bulb dimming, please set to Trailing edge mode.

Note: Because of the AC waveform change, the AC motor will have some noise output when you use this dimmer.


Software Installation:

It has 2 basic versions: Bluetooth and Wi-Fi and this is the Wi-Fi LazyBone dimmer. If you want a Bluetooth LazyBone click here. We provide a free Android/iOS App for you to control it. You can control multi Lazybones via one App.

How to use the software:

1. You need to configure the Wi-Fi module first and assign a valid IP address to it. Here is the setting guide.

2. Click the App, if your phone Wi-Fi is not turned on, it will indicate to turn it on.

2. Click the Menu and then 'Connect device' (iOS app click TINYOS logo). Assign a name for it, for example: Room->Input IP address(WIFIbee IP)->Input port number 2000->OK.

3. Now you can control the lamp turning it on/off by pressing the on/off button on the left corner and adjusting the light by rotating the knob.

 

Wiring Diagram

You can power the big Lazybone dimmer with AC 110-240V power directly. You can leave GND port open. But we suggest connect it if possible.

Device Action State
Real Knob Click        Toggle the lamp ON/OFF state
Virtual Knob(APP) Click       Toggle the lamp ON/OFF state

  

 With SPDT switch

Device Action State
Real Knob Click        Toggle the lamp ON/OFF state
Virtual Knob(APP) Click       Toggle the lamp ON/OFF state
SPDT Switch Push Toggle the lamp ON/OFF state


Commands

We have also provided a very simple command set for developer developing their own APP.  The Lazybone operates with an easy to use command set as described in the table below.

Command (Hex) Action            
5B 00 0D

Get lamp states - sends 2 bytes back to the controller: 'on/off state'+'light value'  

on/off state: 0-OFF, 1-ON

light value:  0x00-0xFF,   0x00- Brightest, 0xFF- Darkest

67 xx 0D xx - light value. 0x00-0xFF,   0x00- Brightest, 0xFF- Darkest
65 00 0D Turn on Lamp
6F 00 0D Turn off  Lamp

 

Features:

  • AC 110-240 working voltage.
  • 50/60Hz auto detecting.
  • Max Load: 500W
  • Control distance:All WiFi network covered area
  • Gentle gradient light
  • Support Android: Above V2.2/ iPhone 4s or later

Download: